salve a tutti,
vi spiego brevemente il mio problema:.
Ho acquistato da poco 2 telecamere di sorveglianza wireless da mettere in giardino. Il problema è che queste camere per trasmettere il video hanno bisogno di un segnale wireless, a detta del produttore, molto forte e in effetti nel punto del giardino dove voglio metterle non riescono a connettersi, nonostante nello stesso punto io riesca a collegare senza problemi dispositivi wireless come laptop e telefoni.
Premesso che come modem/router utilizzo un TP-LINK TD-W8961ND preso apposta pensando che le sue 2 antenne potessero sopperire al problema. :@
A questo punto pensavo se tra la distanza del TP-LINK TD-W8961ND e le telecamere potevo mettere, configurandolo con un portatile, il router Netgear WGR614 come ponte per aumentare il segnale nella zona dove è debole.
Ho configurato il Netgear come da istruzioni:
Setting Up a Repeater Unit
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
To configure a Wireless-G Router as a repeater unit:
1. If you are using the same model of wireless router for both the base station and repeaters, you
must change the LAN IP address for each repeater to a different IP address in the same subnet
(see “Using the LAN IP Setup Options” on page 4-1).
2. Check the Wireless Settings screen, and verify that the wireless settings match the base unit
exactly. The wireless security option must be set to WEP or None.
3. In the Wireless Repeating Function screen, select the Enable Wireless Repeater Mode radio
button.
This IP address must be in the same subnet as the base station but different from the LAN IP of
the base station.
4. Fill in the Base Station MAC Address field.
5. Click Apply to save your changes.
6. Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the wireless router should be able to
connect to the Internet or share files and printers with any other wireless or wired computer or
server connected to the other AP.
Ho semplicemente messo lo stesso NOME SSID, stessa crittografia (nessuna) e canale.
Dopo diche ho abilitato l'opzione Wireless Repeater e messo l'indirizzo MAC del TP-LINK e l ip 192.168.1.2
Devo disattivare il DHCP ? :huh:
Che Ip devo mettere? :huh:
Per quanto riguarda il TP link mi sono ispirato a questa pagina:
http://www.tp-link.it/article/?id=327
Ho messo quindi la modalità WDS con il MAC address del netgear, cambiato ip a 192.168.1.2 come dice al passo 5 e disattivato i DHCP.
Fatto tutto questo ho provato a connettermi al netgear tramite WIFI ma mi dice che la connessione è limitata o assente. :dodgy:
Qualcuno può dirmi se la procedura è giusta o se sbaglio qualcosa?
Grazie!