Xiaomi Mi Router 3G WiFi b/g/n/ac 1200Mbps, Gigabit WAN/LAN, USB 3.0

Router Wireless, SOHO, Load Balance ed Enterprise
Avatar utente
effeti
Moderatore globale
Messaggi: 1783
Iscritto il: 02/06/2010, 15:32
Ha ringraziato: 8 volte
E’ stato ringraziato: 22 volte

Re: Xiaomi Mi Router 3G WiFi b/g/n/ac 1200Mbps, Gigabit WAN/LAN, USB 3.0

Messaggio da effeti » 25/02/2019, 12:15

Hi Gilles, I had the same error with strongswan's installation on 18.06.2 default image.
Do you want to add ipset only?



gillesM
Messaggi: 3
Iscritto il: 10/02/2019, 23:02

Re: Xiaomi Mi Router 3G WiFi b/g/n/ac 1200Mbps, Gigabit WAN/LAN, USB 3.0

Messaggio da gillesM » 25/02/2019, 14:08

Hello,
Thank you for your answer. What I'm trying to add is the Vpn policy-based routing package:
https://github.com/stangri/openwrt_pack ... /README.md

The requirements are the following ones:
"This service requires the following packages to be installed on your router: ipset, resolveip, ip-full (or a busybox built with ip support), kmod-ipt-ipset and iptables."

And also "dnsmasq-full" in addition to the packages themselves: vpn-policy-routing luci-app-vpn-policy-routing

After trying, I have the impression that only ipset and kmod-ipt-ipset are a problem, but I may be mistaken.

Gilles

Avatar utente
effeti
Moderatore globale
Messaggi: 1783
Iscritto il: 02/06/2010, 15:32
Ha ringraziato: 8 volte
E’ stato ringraziato: 22 volte

Re: Xiaomi Mi Router 3G WiFi b/g/n/ac 1200Mbps, Gigabit WAN/LAN, USB 3.0

Messaggio da effeti » 25/02/2019, 16:08

I compiled the firmware with ipset, resolveip, ip-full, kmod-ipt-ipset, iptables and dnsmasq-full as specified here.
Let me know if it works ;)
openwrt-ramips-mt7621-mir3g-squashfs-sysupgrade.tar
Non hai i permessi necessari per visualizzare i file allegati in questo messaggio.

vix66
Messaggi: 10
Iscritto il: 24/02/2018, 18:53

Re: Xiaomi Mi Router 3G WiFi b/g/n/ac 1200Mbps, Gigabit WAN/LAN, USB 3.0

Messaggio da vix66 » 06/03/2019, 14:24

effeti ha scritto:
17/02/2019, 16:44
@vix66 si è possibile usare le due porte lan ma se lo devi connettere ad un altro router devi prima disattivare il server dhcp.
Ciao, ho disattivato il dhcp, lasciandolo sul router a monte, ma le due porte non trafficano, suppongo che dovrò dare un occhiata a /etc/config/network

Avatar utente
effeti
Moderatore globale
Messaggi: 1783
Iscritto il: 02/06/2010, 15:32
Ha ringraziato: 8 volte
E’ stato ringraziato: 22 volte

Re: Xiaomi Mi Router 3G WiFi b/g/n/ac 1200Mbps, Gigabit WAN/LAN, USB 3.0

Messaggio da effeti » 06/03/2019, 19:51

Non c'è bisogno di modificare /etc/config/network, non devi usare la porta blu (WAN).

gillesM
Messaggi: 3
Iscritto il: 10/02/2019, 23:02

Re: Xiaomi Mi Router 3G WiFi b/g/n/ac 1200Mbps, Gigabit WAN/LAN, USB 3.0

Messaggio da gillesM » 19/03/2019, 20:43

effeti ha scritto:
25/02/2019, 16:08
I compiled the firmware with ipset, resolveip, ip-full, kmod-ipt-ipset, iptables and dnsmasq-full as specified here.
Let me know if it works ;)

openwrt-ramips-mt7621-mir3g-squashfs-sysupgrade.tar
Hello,
I relied on the forum's automatic notification for your answer, but it seems I misconfigured something as I never received a notification.
Anyway, I finally saw your post. Thank you so very much for your firmware: it works perfectly works with the VPN policy routing app! Really, everything is working smoothly and simply.

Thank you again!
Gilles

Rispondi